Notice: Due to the Chinese New Year, to get your PCB order shipped before holiday, please place order before Jan 13. Please check the blog page for more details.
Temperature and Humidity Sensor Breakout Board SHT20


Sensiron temperature and humidity sensors are very popular for their accuracy and the SHT20 is no exception.

This is a breakout board for the SHT20 temperature and humidity sensor, a small-sized SMD package. The accuracy is good for most applications with ±3% in relative humidity and ±0.3% for temperature measurements. It provides calibrated, linearized sensor signals in digital, I2C format.

It also has minimal power consumption, a feat considering what’s packed into the mini chip. Compared to the DHT serial sensor, it’s more compact and a better fit for smaller projects.

The SHT20 sensor comes pre-soldered to the breakout board, all you need to do is solder the male header pins to the sensor, hook it up, and start measuring temperature and humidity.



  • Humidity Range - %RH: 0 to 100 %
  • Accuracy: ±3 %RH
  • Supply Voltage: 2.1 to 3.6 V
  • Resolution: 12 b
  • Operating Temp Range: -40 to +125 °C


SHT20 datasheet

Write a review

Note: HTML is not translated!
    Bad           Good

Temperature and Humidity Sensor Breakout Board SHT20

This temperature and humidity sensor comes mounted on a breakout board and is unparalleled in accuracy and stability
  • Product Code: 101859
  • Availability: In Stock
  • $5.99
  • 5+$5.70
  • 10+$5.60
  • 30+$5.30
  • 100+$5.10
Learn More