VEML6070 UV Sensor Breakout Board (102070)


This is a breakout board based on the VEML6070 UV sensor.

VEML6070 is an advanced ultraviolet (UV) light sensor with I2C protocol interface and designed by the CMOS process. It is easily operated via a simple I2C command. The active acknowledge (ACK) feature with threshold windows setting allows the UV sensor to send out a UVI alert message. Under a strong solar UVI condition, the smart ACK signal can be easily implemented by the software programming.

VEML6070 incorporates a photodiode, amplifiers, and analog / digital circuits into a single chip. VEML6070’s adoption of FiltronTM UV technology provides the best spectral sensitivity to cover UV spectrum sensing. It has an excellent temperature compensation and a robust refresh rate setting that does not use an external RC low pass filter. VEML6070 has linear sensitivity to solar UV light and is easily adjusted by an external resistor. Software shutdown mode is provided, which reduces power consumption to be less than 1 μA. VEML6070’s operating voltage ranges from 2.7 V to 5.5 V.


  • Operation Voltage: 2.7V to 5.5V
  • Protocol Interface: Standard I2C 
  • Peak Sensitivityλp: 355 nm’
  • Spectrum Sensitivityλ0.1: 320-410 nm
  • Integrated Modules: ultraviolet sensor (UV), and signal conditioning IC
  • Converts Solar UV light intensity to digital data
  • Excellent UV Sensitivity and linearity
  • Excellent Performance of UV Radiation Measurement Under Long Time Solar UV Exposure
  • Excellent Temperature Compensation
  • High Dynamic Detection Resolution
  • Temperature Compensation: -40℃ to +85℃
  • Dimension: 12.5 x 13mm
  • Weight: 0.8g


Write a review

Note: HTML is not translated!
    Bad           Good

VEML6070 UV Sensor Breakout Board (102070)

  • Product Code: 102070
  • Availability: SOLD OUT
  • $5.90
  • 5+$5.50
  • 10+$5.20
  • 30+$4.80
  • 100+$4.50

Tags: modules other