We will be close for the holidays from 29th September till 7th October. Orders will still be accepted and will be process when we resume operation on 8th October 2023
USB Relay 1 Channel (102056)

Description:

If you need to control power via your computer’s USB port, this is the right one to choose. This module has a CH340 USB to serial interface chip, and a STM8S103 MCU as a gateway to receive command and then control the relay to turn on and off. The relay module (SRD-05VDC-SL-C) can load up to 10A 250VAC power with no issue, that is enough for most of the applications.

Install the CH340 driver, write a few lines of codes, then developers can control a relay module. There are two LED indicators, one is for USB port connection and one is for relay on and off status.

Commands: 

  • Turn On: A0 01 01 A2
  • Turn Off: A0 01 00 A1

Python example code:

import serial

import time


usb_relay = serial.Serial("COM17",9600)

if usb_relay.is_open:

   print(usb_relay)

   on_cmd = b'\xA0\x01\x01\xa2'

   off_cmd =  b'\xA0\x01\x00\xa1'

   usb_relay.write(on_cmd )

   time.sleep(1)

   usb_relay.write(off_cmd)

   time.sleep(1)

usb_relay.close()


Specifications:

  • Baud Rate: 9600BPS
  • Relay Lifetime: 100K times
  • Relay Contact Rating : AC 250V 10A, DC 30V 10A
  • Dimensions: 63 x 16.3 x 19.2mm
  • Weight: 15g



Links:

Write a review

Note: HTML is not translated!
    Bad           Good

USB Relay 1 Channel (102056)

  • Product Code: 102056
  • Availability: In Stock
  • $4.90
  • 10+$4.50
  • 30+$4.20
  • 100+$3.80

Tags: modules