Real Time Clock Module (I2C)

Features:

  • Consumes less than 500nA in battery-backup mode with oscillator running
  • Automatic power-fail detection
  • 56-Byte, battery-backed, general-purpose RAM
  • Backup by AT24C32 32Kbit
  • I2C Serial Interface


Description:

This little, RTC (real time clock), will keep track of time even if reprogrammed or if power is lost. Use it in projects for data logging, clock-building, time stamping, timers, alarms, etc.


Since an Arduino microcontroller’s time keeping ability (millis()), is very limited in capability—i.e. can only keep track of time since its last power-up—it’s useful to have a separate RTC chip to keep a consistent count.


This module will keep track of time by seconds, minutes, hours, days, months, and year. You can program it to run either by 24-hour or 12-hour formats with AM/PM. It even accounts for months with less than 31 days and leap-years.


While the battery is not included (we recommend a coin cell battery), from this tiny RTC’s low power consumption you can expect it to run 5 years or more. If there is a power failure, the built-in power-sense circuit will automatically detect and switch to backup supply, preventing an interruption in time-keeping. It works best with 5V power.



    Package Content:

    1x RTC I2C real time clock module 24C32 storage DS1307


    Datasheet:

    DE4205-sample.zip
    AT24C32.pdf
    DS1307.pdf

    Write a review

    Note: HTML is not translated!
        Bad           Good

    Real Time Clock Module (I2C)

    • Product Code: 10100004
    • Availability: In Stock
    • $1.99
    • 10+$1.70
    • 30+$1.50
    • 100+$1.00
    Learn More