Description

Get your start in robotics and making things move! The MG995 is an excellent choice for a high torque, digital metal geared servo. It comes in a standard size and its metal gears mean when the motor is in a jam, the gears aren’t likely to strip. 

This medium servo will rotate up to 60 degrees.  This servo with its metal gears comes in at 55g and is a good choice for medium-large sized projects.

Each servo comes with 3 arms and screws and with pre-soldered female wires. When using servos, we recommend using pin 9 or 10, a standard in the Servo library.

It's easy to fry servos, make sure you plug it into your brain correctly. 

PWM (Signal) is Orange 

VCC (Power) is Red

GND (Ground) is Brown 

Specifications

• Weight: 55g
• Dimension: 40.7× 19.7× 42.9mm
• Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6v)
• Operating speed: 0.20 sec/60 degree (4.8v); 0.16sec/60degree (6.0v)
• Operating voltage: 4.8~ 6.6v
• Gear Type: Metal gear

Links

Instructables links for How-to-Arduino-3-Servos

Manufacturer Product Page